Free cookie consent management tool by TermsFeed
Dipping Equipments

The application of technology plays an important role in the developing and manufacturing process of the product. Widely used in the application scene(s) of Transfer Printing, the product has won wide popularity. Modern technologies innovate means are adopted for the flawless manufacturing of TSAUTOP 1.6m length hydrographic film printer for water transfer printing with CE certification.So far, the application areas of the product have been expanded to the Transfer Printing. The design is the most striking aspect of Hangzhou chaotuo decorative film technology Co., Ltd. Its design comes from our designers who are sensitive to fashion and are know the commercial needs of the market very well. Also, 装饰膜 made of well-selected raw materials.

Method:Water Transfer PrintingUsage:water transfer printing machine
Place of Origin:Zhejiang, ChinaBrand Name:TSAUTOP
Model Number:TS-RDT500Name:water transfer printing machine
Gross Power:9000WVoltage:220V and customize accept
Dipping area:available sizeCertification:CE
Pump:Stainless Stell PumpMatherial:2.5mm Stainless steel and customizable
Heating Elements:1 set, single phase,220v,50HZ,9000Wlength:1.6m or customized
Printing width:1.6m


TSAUTOP 1.6m length hydrographic film printer for water transfer printing with CE certification

 

This pictorial machine is a mechatronics device ,There are both fine

organization structure, and complicated electronic circuit system. Institutions in part with precision of the print head, in the process of moving and using slightly to avoid collision and vibration. To ensure that the work site clean and with no obvious dust around the machine. Part of the circuit have important CPU, memory and other sensitive electronic devices. When start up the machine must be connected to ground electrode to avoid electrostatic causing other malfunction. This equipment can not be used in damp environment .

You are using the method of operation and maintenance process directly determines the pictorial machine’s length of life,and machine's daily work . So once again remind you must read this manual carefully, operation, maintenance, maintenance as required. So as not to cause the machine can't leak ink, ink and other abnormal phenomenon occurred.

Chapter one notice for use

1.1 The power supply security

A , power :one-way communication 50Hz 220V or 110V AC(±10%) .Maximum power machine :2200W ,print power 100W .

B, Only can use the printer in the label logo type of power supply . according to different countries and regions, may choose 110 v or 110 v ac power

C, Will all of the devices connected to a properly grounded outlet, avoid the use of sockets and frequent switching between the on and off the equipment (e.g., duplicator, air conditioning system) in the same loop

D, Avoid the use of controlled by the switch on the wall or automatic timer socket.

E,Make your computer system away from potential interference sources ,for example: the speaker or wireless phone stand.

F, Do not use damaged or broken power cord

G, If you use the additional power cord, bear in mind that the insertion of the additional power equipment total amperes do not exceed the rated amperage of the power supply, In addition, remember that the insertion of the all equipment on the wall to the total number of ampere don't exceed the amperage rating of the wall outlet.

H, Don't try to repair his pictorial machine, encounter problems please timely for

pictorial machine maintenance and technical personnel

I, For man and machine safety, please do good earthed, specific requirements have

installed staff informed

J,Can't charged printing line plug and pull the power cord, otherwise will causes the

damage of the main board.

1.2 Operation cautions

A, Always turn off the power switch to using pictorial machine (pictorial machine on

the right side of the rear power switch) . In front of the machine power supply has

not been cut off, please don't take photo electrical source plug or unplug other

related cable

B, Please do not put the machine tools or other items with the print platform or on flat,

so as not to slow to clean up before the machine's operation cause unnecessary losses.

C, Before handling pictorial machine, please make sure you print the car has been

fixed in initial position.

D,When print the picture, the paper machine(prevent become warped piece) must be used,in case of paper by partial and blowing nozzle.

E, Someone must watch when the machine work.(the machine must be operated by professional operators).

F, Encoder a trip should be regularly check to see if clean and damaged,if dirty should use cotton swap dipped in alcohol to clean.

G, guide should be regularly check to see if clean; It is recommended to use 1 to 2 months to be above the guideway butter (or parts of lubricating oil, etc.), decrease the slider friction.

H,Regularly check the maintenance station cleaning job.

I, Don't let the nozzle left under the maintenance station exposed to the air for a long time. J, Abnormal shutdown condition; Do not manually pull the car quickly, should let its boot

automatically back to the warehouse.

K,Regular maintenance of machine, reducing dust, the ink on the influence of the machine

L, Note: the machine must be connected to ground; When the dry air, static problem that nots allow to ignore, when using some lamination and light medium, take electrostatic charge (especially when into the paper work soon).Electrostatic charge can lead to the machine and the card security is damaged, will take the ground wire is the only way to electrostatic discharge. Because the static power

itself is a huge, so when charged the ink head operation, ensure that the hands have discharge (contact grounding metal body or wear in addition to electrostatic bracelet), otherwise easy to cause damage of the board and the nozzle.

1.3Location of the installation and use of environmental considerations

A,please make the pictorial machine in level, stability, and greater than pictorial machine in the plane. If pictorial machine tilt or have a certain Angle, the normal work of the machine could not be performed

B, to set aside enough space around the pictorial machine to ensure the normal ventilation of pictorial machine.

C, make the printing machine be placed in close to the wall outlet in order to easy to plug.

D, avoid in the place of the drastic change of temperature and humidity, easy to use pictorial machine. Avoid printer by direct sunlight, strong light or heat source.

E, pictorial machine using temperature: 18 to 26 degrees Celsius; Humidity: 38% to 38%.To make the machine can run in the groove, please configure air conditioning and indoor temperature and humidity meter.

F, the machine must be far away from the noise source.

1.4 The ink is put and precautions for use

A, Please put the ink bottle at the children can’t reach, don't let the kids drink ink cartridges or contact.

B, if the ink stick to the skin, please wash with soap and water .If the ink splash the eyes, immediately rinse off with clear water.

C, don't shake the ink bottle, so as not to cause the ink leaks.

D, ink bottle after using for a period of time (usually for two months), immediately take a thorough cleaning, and dry. Replace the ink bottle should pay attention to clean, to ensure the quality of printing. E, the ink should be placed a cool storage, avoid direct sunlight.

 

 TSAUTOP 1.6m length hydrographic film printer for water transfer printing with CE certification

Other materials

1.Hydro films: 2—3usd per square meter, more than 4000 designs available

2.Activator A: 15usd/liter

3.Activator B: 12usd/liter

4.Speed shapes: 0.9usd/pc minimum 50pcs, white/black color available

5.Printer: A3+ printer(maximum print width 480mm)+600ml inks:1100usd/set

6.Printable blank hydro film: 1.27*250m/roll, 3.2usd/sqm; A3 and A4 available

TSAUTOP 1.6m length hydrographic film printer for water transfer printing with CE certificationTSAUTOP 1.6m length hydrographic film printer for water transfer printing with CE certification

TSAUTOP 1.6m length hydrographic film printer for water transfer printing with CE certificationTSAUTOP 1.6m length hydrographic film printer for water transfer printing with CE certification

Shipping and Payment

Payment Terms: DDP, DDU, CIF, FOB, EXW

Payment   way:  T/T Bank Transfer, Paypal, West Union, Moneygram

 

Company Information

 

TSAUTOP 1.6m length hydrographic film printer for water transfer printing with CE certification

TSAUTOP 1.6m length hydrographic film printer for water transfer printing with CE certificationTSAUTOP 1.6m length hydrographic film printer for water transfer printing with CE certification

 

 

 Lynn He Sales Manager

TSAUTOP (HANGZHOU) DECORATION FILM TECHNOLOGY CO., LTD  

TS (RUIAN) AUTO PARTS FACTORY

260# , Str. 6,Hangzhou Economic and Technological Development Zone

310018 Hangzhou China

Tel:+86-571-88944800      Fax:+86-571-88944300    

 

Skype: lynnhe01

 

M.P./Whatsapp:+8615325729820   Web:www.tsautop.com   

Facebook: www.facebook.com/he.lynn.73

Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

​​​​​​​contact US

GET IN TOUCH WITH US

The first thing we do is meeting with our clients and talk through their goals on a future project. During this meeting, feel free to communicate your ideas and ask lots of questions.

Recommended

They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.

Send your inquiry

Choose a different language
English
العربية
Deutsch
Español
français
italiano
日本語
한국어
Português
русский
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English