TSAUTOP® This pictorial
machine is a mechatronics device ，There are both fine organization structure, and complicated electronic circuit system. Institutions in part with precision of the print head, in the process of moving and using slightly to avoid collision and vibration. To ensure that the work site clean and with no obvious dust around the machine. Part of the circuit have important CPU, memory and other sensitive electronic devices. When start up the machine must be connected to ground electrode to avoid electrostatic causing other malfunction. This equipment can not be used in damp environment .
You are using the method of operation and maintenance process directly determines the pictorial machine’s length of life,and machine's daily work. So once again remind you must read this manual carefully, operation, maintenance, maintenance as required.So as not to cause the machine can't leak ink, ink and other abnormal phenomenon occurred.
Chapter one notice for use
1.1 The power supply security
A ,power: one-way communication 50Hz 220V or 110V AC(±10%) 。Maximum power machine ：2200W ，print power 100W .
B,Only can use the printer in the label logo type of power supply . according to different countries and regions, may choose 110v or 110 v ac power
C,Will all of the devices connected to a properly grounded outlet, avoid the use of sockets and frequent switching between the on and off the equipment (e.g., duplicator, air conditioning system) in the same loop
D,Avoid the use of controlled by the switch on the wall or automatic timer socket.
E,Make your computer system away from potential interference sources ，for example: the speaker or wireless phone stand.
F, Do not use damaged or broken power cord
G, If you use the additional power cord, bear in mind that the insertion of the additional power equipment total amperes do not exceed the rated amperage of the power supply, In addition, remember that the insertion of the all equipment on the wall to the total number of ampere don't exceed the amperage rating of the wall outlet.
H,Don't try to repair his pictorial machine, encounter problems please timely for pictorial machine maintenance and technical personnel
I, For man and machine safety, please do good earthed, specific requirements have installed staff informed
J,Can't charged printing line plug and pull the power cord, otherwise will causes the damage of the main board.
1.2 Operation cautions
A,Always turn off the power switch to using pictorial machine (pictorial machine on the right side of the rear power switch) . In front of the machine power supply has not been cut off, please don't take photo electrical source plug or unplug other related cable
B,Please do not put the machine tools or other items with the print platform or on flat, so as not to slow to clean up before the machine's operation cause unnecessary losses.
C,Before handling pictorial machine, please make sure you print the car has been fixed in initial position。
D,When print the picture, the paper machine(prevent become warped piece) must be used，in case of paper by partial and blowing nozzle.
E,Someone must watch when the machine work.(the machine must be operated by professional operators).
F,Encoder a trip should be regularly check to see if clean and damaged，if dirty should use cotton swap dipped in alcohol to clean.
G,guide should be regularly check to see if clean; It is recommended to use 1 to 2 months to be above the guideway butter (or parts of lubricating oil, etc.), decrease the slider friction.
H,Regularly check the maintenance station cleaning job.
I,Don't let the nozzle left under the maintenance station exposed to the air for a long time.
J,Abnormal shutdown condition; Do not manually pull the car quickly, should let its boot automatically back to the warehouse.
K,Regular maintenance of machine, reducing dust, the ink on the influence of the machine
L,Note: the machine must be connected to ground; When the dry air, static problem that nots allow to ignore, when using some lamination and light medium, take electrostatic charge (especially when into the paper work soon).Electrostatic charge can lead to the machine and the card security is damaged, will take the ground wire is the only way to electrostatic discharge. Because the static power itself is a huge, so when charged the ink head operation, ensure that the hands have discharge (contact grounding metal body or wear in addition to electrostatic bracelet), otherwise easy to cause damage of the board and the nozzle.
1.3Location of the installation and use of environmental considerations
A,please make the pictorial machine in level, stability, and greater than pictorial machine in the plane. If pictorial machine
tilt or have a certain Angle, the normal work of the machine could not be performed
B,to set aside enough space around the pictorial machine to ensure the normal ventilation of pictorial machine.
C,make the printing machine be placed in close to the wall outlet in order to easy to plug.
D,avoid in the place of the drastic change of temperature and humidity, easy to use pictorial machine. Avoid printer by direct sunlight, strong light or heat source.
E,pictorial machine using temperature: 18 to 26 degrees Celsius; Humidity: 38% to 38%.To make the machine can run in the groove,please configure air conditioning and indoor temperature and humidity meter.
F,the machine must be far away from the noise source.
1.4 The ink is put and precautions for use
A, Please put the ink bottle at the children can’t reach, don't let the kids drink ink cartridges or contact.
B, if the ink stick to the skin, please wash with soap and water .If the ink splash the eyes, immediately rinse off with clear
water.
C, don't shake the ink bottle, so as not to cause the ink leaks.
D, ink bottle after using for a period of time (usually for two months), immediately take a thorough cleaning, and dry. Replace the ink bottle should pay attention to clean, to ensure the quality of printing. E, the ink should be placed a cool storage, avoid direct sunlight.
