Hydro Dipping Machine
One-stop Hydro Dipping Solution Supplier.
Language
One-stop Hydro Dipping Solution Supplier.
The Hydrographics Automatic Dipping Machine is the most intelligent piece of machinery for fully automatic water transfer printing. It is equipped with an automatic constant temperature system, an automatic activator spray system, an automatic film laying system, an automatic dipping arm, an automatic water circle, and an automatic filtering system.
To allow for precise control over each processing step and ease of operation, the entire manufacturing line is made up of multiple processing lines. Consequently, complex operational processes are not necessary for this system.
It is widely utilized in industry, particularly in the motorcycle, furniture, electronics, machine tool, and automotive sectors. owner.
Step1.flushing water for clean—
Step 2. Blowing the bubble of the water surface by air nozzle and divider—-
Step 3. Laying the film on the water—
Step 4. Film on the water for 25-35seconds—
Step 5. spraying activator on the film—
Step 6. Dipping the products by dipping the arm—
Step 7. Putting out the products from the water—
Step 8. Finish dipping—
Step 9. Rinsing the products’ surface with the rinsing station.
The whole process will take 1.5-3 minutes.
Without Power | 1. Checking E-Stop Switch On/OFF status 2. Checking inlet wiring voltage 3. Checking air-break switch at On status 4. Checking Power input switch |
Heater does not work, but indicate temperature | 1. Checking Heating Wiring status 2. Checking Heating pipe damage or not |
Heater does not working, no indicating temperature | 1. Checking Heating switch at On status 2. Checking Temperature controller Wiring 3. Checking Temperature Controller damage or not |
Heater continuous working after temperature reaching presetting temperature | 1. Check K mode Heating Couple Wiring 2. Check if K Mode Heating Couple Damage 3. Check Temperature Controller damage or not |
Water pump does not work，indicating lights on | 1. Checking water pump wiring and master power wire, and change any 2 wires order 2. Checking water pump damage or stuck |
Machine working well, indicating lights off | Replacing indicating lights |
Item NO. | TSHDTA2400 L*W*H | TSHDTA3000 L*W*H | TSHDTA3500 L*W*H |
Machine Size | 300 * 130 * 90 (cm) | 360 * 130 * 90 (cm) | 400 * 130 * 90(cm) |
9.84* 4.27 * 2.95(ft) | 11.8 * 4.27f* 2.95(ft) | 13.12 * 4.27 * 2.95(ft) | |
Dipping Area Size | 200 * 110 * 70(cm) | 260 * 110 * 70(cm) | 300 * 110 * 70(cm) |
6.56* 3.6* 2.3(ft) | 8.53* 3.6* 2.3(ft) | 9.84* 3.6* 2.3(ft) | |
Total output power | AC 380V 50/60HZ, 18.5KW, 370AMP | ||
Machine Material | Thickness =2.5mm+-0.2mm 201#Stainless Steel | Thickness =2.5mm+-0.2mm 201#Stainless Steel | Thickness =2.5mm+-0.2mm 201#Stainless Steel |
Dipping Arm Material | 4*8 2mm thickness aluminum alloy | 4*8 2mm thickness aluminum alloy | 4*8 2mm thickness aluminum alloy |
Dipping Arm Size | H230*60(cm).holding frame 50*50(cm) | H230*80(cm).holding frame 70*150(cm) | H230*100(cm).holding frame 90*180(cm) |
Dipping Arm Load-bearing | Electric 80kg | Electric 150kg | |
Dipping Arm Power | single /3 phases 220/380V 1500w servo motor | single /3 phases 220/380V 1500w servo motor | single /3 phases 220/380V 1500w servo motor |
Continuous Flow System | 130*50*30，Power single /3 phases 220/380V 400w servo motor for film release;750w for film machine moving | 130*50*30，Power single /3 phases 220/380V 400w servo motor for film release;750w for film machine moving | 130*50*30，Power single /3 phases 220/380V 400w servo motor for film release;750w for film machine moving |
Automatic Spray System | 130*35.2pcs spray guns, 400w servo motor for guns moving;750w for gun rack moving | 130*35.2pcs spray guns, 400w servo motor for guns moving;750w for gun rack moving | 130*35.2pcs spray guns, 400w servo motor for guns moving;750w for gun rack moving |
Heating Elements | 2Set, 208-240V, Single Phase, 50 Hz, 2*6000W | 2 Sets, 208-240V, Single Phase, 50 Hz, 6000W*2 | |
Water Recirculation System | 220V, Single Phase, 50 HZ, 750W | 208-240V, Single Phase, 50 HZ, 750W | |
contact US
GET IN TOUCH WITH US
The first thing we do is meeting with our clients and talk through their goals on a future project. During this meeting, feel free to communicate your ideas and ask lots of questions.
Recommended
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.
Copyright © 2024 Hangzhou TSAUTOP Machinery Co., Ltd - aivideo8.com All Rights Reserved.
